TLC372ID

TLC372ID Overview

The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.The comparator has a type CMOS, MOS, Open-Drain, TTL output.We ship the part through Tube .There are 8 terminals on the comparator.The chip belongs to Comparator .With a 5V voltage supply, the comparator can perform multiple demanding tasks.In terms of type, this is a typical Differential comparator.There are a total of 2 elements in it.The device includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator consists of 8 pins.You can find more pin-to-pin solutions for your special requirements by searching TLC372 .There is a quiescent current of 400μA in this comparator.The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be 300μA .Current supply exceeding 150μA could cause disfunction of the compartator.There is sufficient power to run the device from 5V power supplies.There is a maximum current that can be input into the device of 5pA .This part is from the LinCMOS? comparator series.In order to operate normally, a supply voltage of 0 is required.

TLC372ID Features

CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 400μA

TLC372ID Applications

There are a lot of Texas Instruments TLC372ID linear comparators applications.

• Mobile Phones
• Self-diagnostics
• Automotive
• System control and monitoring
• Window Comparators
• Pulse, Squarewave, and Time Delay Generators
• General-Purpose, Low-Voltage Applications
• Infotainment and Clusters
• Factory automation & control
• Wide Range VCO; MOS Clock Timers