TLC372QDR

TLC372QDR Overview

The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.The comparator has a type CMOS, MOS, Open-Drain, TTL output.This device is designed in Tape & Reel (TR) case.There are 8 terminals on the comparator.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .When it comes to types, this comparator is a typical Differential .Electronic comparator consists of 2 elements in total.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended that you mount the device using type Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.8 pins are available on the comparator.You can find more pin-to-pin solutions by searching TLC372 .There is a quiescent current of 300μA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normal operation of the device requires a nominal supply current of 300μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 150μA .The device can be powered by 5V power supplies.Electronic comparator is possible to input a maximum of 5pA current into the device.This part is from the LinCMOS? comparator series.For normal operation, there should be 15V operating supply voltage applied.Comparator electronics is acceptable to pack the device by TR .

TLC372QDR Features

CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 300μA

TLC372QDR Applications

There are a lot of Texas Instruments TLC372QDR linear comparators applications.

• Window Comparators
• Analog front end
• Threshold Detectors
• Ultra-Low Power Systems
• General Purpose Low Voltage Applications
• Window Comparators, Multivibrators
• Laptop Computers
• Infotainment & cluster
• Power management
• Zero-Crossing Detectors