TLC374CDR

TLC374CDR Overview

To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, MOS, Open-Drain, TTL output is used here.The part is shipped by Tape & Reel (TR) .As you can see, the comparator has14 terminals.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical Differential comparator.This element consists of 4 elements in total.There are 14 pins on this board.Electronic comparator is recommended to mount the device using type Surface Mount .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator is equipped with 14 pins.Alternatively, you may search for TLC374 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 800μA volts.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 600μA .A current supply greater than 150μA may cause the comparator to malfunction.In order to operate the device, 5V power supplies are sufficient.Input current to the device is limited to 5pA .The part belongs to the LinCMOS? series of comparator parts.The device is acceptable to pack by TR .

TLC374CDR Features

CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 800μA

TLC374CDR Applications

There are a lot of Texas Instruments TLC374CDR linear comparators applications.

• Pulse, Squarewave, and Time Delay Generators
• Infotainment and Clusters
• Limit Comparators
• Window Comparators
• Power management
• High-Speed Sampling Circuits
• Laptop Computers
• RC Timers
• Analog front end
• General Purpose Low Voltage Applications