TLC374CN-A

TLC374CN-A Overview

Electronic comparator is packaged in 14-DIP (0.300, 7.62mm) for convenient transportation.This comparator is of the CMOS, MOS, Open-Drain, TTL output type.This device is designed in Tube case.There are14 terminals on the comparator.The chip belongs to Comparator .When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical Differential comparator.Electronic comparator has a total of 4 elements.The device is equipped with 14 pins.In general, mounting type Through Hole is recommended.Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.Electronic comparator has 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search TLC374 .This comparator presents a quiescent current of 800μA .There is a Through Hole for mounting it on a PCB or other board.Normally, the nominal supply current should be 600μA when using the device.If the current supply exceeds 600μA , the comparator might be damaged.The device can be run with 5V power supplies.You are allowed to input a maximum current of 5pA into the device.The part is based on LinCMOS? .

TLC374CN-A Features

CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 800μA

TLC374CN-A Applications

There are a lot of Texas Instruments TLC374CN-A linear comparators applications.

• Self-diagnostics
• Zero-Crossing Detectors
• Pulse, Squarewave, and Time Delay Generators
• Lithium ion battery monitoring
• Power management
• General-Purpose, Low-Voltage Applications
• Window Comparators, Multivibrators
• Automatic Test Equipment
• Wireless Base Stations
• Mobile Communications