TLC393QDR

TLC393QDR Overview

A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .A comparator with a MOS, Open-Drain output is used here.This chip is designed with the Cut Tape (CT) package.8 terminals are found on the comparator.The electrical component here belongs to the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In terms of type, this is a typical General Purpose comparator.The total number of elements is 2 .Electronic comparator has 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .8 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLC393 .This comparator presents a quiescent current of 90μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 40μA .A supply current exceeding 20μA may result in the comparator malfunctioning.In order to run the device, there are only 5V power supplies required.Input current to the device cannot exceed 5pA .A comparator part from the LinCMOS? series is used in this part.For normal operation, the operating supply voltage must be 5V .Often found in ADC circuits, this device is packed in TR .

TLC393QDR Features

MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 90μA

TLC393QDR Applications

There are a lot of Texas Instruments TLC393QDR linear comparators applications.

• Hand-Held Electronics
• High-Speed Differential Line Receiver
• Window Comparators
• Wireless Base Stations
• Mobile Phones
• General Purpose Low Voltage Applications
• General-Purpose Portable Devices
• Limit Comparators
• Mobile Communications
• Motor drives