TLC5973DR

TLC5973DR Overview

Save board space with 8-SOIC (0.154, 3.90mm Width) package. 3 outputs are designed into LED drivers.The mounting method is Surface Mount.It is highly reliable and high-performing when it emerges as a Linear.It is possible for the led driver ic to operate normally at -40°C~85°C TA.8 terminations are used in its operation.There are 8 pins used to form the base of its configuration.The number of segments is estimated to be 3.There is a mounting of it by Surface Mount.Under the base part number TLC5973, you'll find this LED driver.6V is a maximum acceptable voltage for the supply.Moreover, it can be classified as Display Drivers due to its characteristics.The minimum input voltage for this device is 3V.To meet high efficiency standards, it works with a voltage of 3V.When the maximum supply current is allowed, the value reaches 6V.In order to maintain maximum efficiency, the supply current cannot exceed 10mA.It is possible to supply the load with 50mA current.The power of systems depends on having 5V voltages inside.The electronic component can function fully when the switching frequency is maintained at 12MHz.When operating at the maximum output current of 50mA, it is capable of providing all the benefits associated with LED drivers.The LED driver belonging to the EasySet? series has many applications.21V should be the maximum output voltage.

TLC5973DR Features

Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Operating with the supply voltage of 5V
Switching frequency of 12MHz

TLC5973DR Applications

There are a lot of Texas Instruments TLC5973DR LED Driver ICs applications.

• Museum lighting
• LED Lightings for Inspection Devices
• Amusement Machines
• OLED power supply for portable equipment
• Linear fluorescent
• High-end retail lighting
• Stage and Studio lighting
• LED backlight driver for LCD displays for portable equipment
• Panel lighting
• Down lights