TLC7701IP

TLC7701IP Overview

This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tube model. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. A supply voltage of 2.7V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. 8 pins are present on the power management system. IC management can only work with a supply voltage of 2V volts. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. The recommended mounting type for IC management is Through Hole. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The power management's supply current is 9μA. There are also other features in the software such as [0], just to mention a few. It is always advisable to use TLC7701, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 16μA.

TLC7701IP Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current

TLC7701IP Applications

There are a lot of Texas Instruments TLC7701IP Voltage Supervisors applications.

• Battery cars
• Detection of phase loss
• Important electronics for automotive safety
• Microcontroller system
• Power distribution systems of CCU
• Refrigeration
• Battery-powered equipment
• emergency room
• Transformer load monitoring equipment
• Computer applications