English

All Products

View All >>
  • TLV2402CDR

TLV2402CDR

2 Channels 200μA per Channel 100pA 63 dB Instrumentational OP Amps 8V 2.5V~16V ±1.25V~8V TLV2402 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-TLV2402CDR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 495
  • Description: 2 Channels 200μA per Channel 100pA 63 dB Instrumentational OP Amps 8V 2.5V~16V ±1.25V~8V TLV2402 8-SOIC (0.154, 3.90mm Width)(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Current - Supply 900nA
Slew Rate 0.0025V/μs
Amplifier Type General Purpose
Common Mode Rejection Ratio 63 dB
Current - Input Bias 100pA
Voltage - Supply, Single/Dual (±) 2.5V~16V ±1.25V~8V
Output Current per Channel 200μA
Input Offset Voltage (Vos) 1.2mV
Bandwidth 5.5 kHz
Gain Bandwidth Product 5.5kHz
Voltage Gain 120dB
Power Supply Rejection Ratio (PSRR) 100dB
Voltage - Input Offset 390μV
Current - Output / Channel 200μA
Max Dual Supply Voltage 8V
Min Dual Supply Voltage 1.25V
Nominal Gain Bandwidth Product 5.5 kHz
Max I/O Voltage 1.2mV
Number of Amplifiers 2
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 6 Weeks
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Supplier Device Package 8-SOIC
Operating Temperature 0°C~70°C
Packaging Cut Tape (CT)
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Base Part Number TLV2402
Output Type Rail-to-Rail
Operating Supply Voltage 8V
Number of Elements 2
Number of Channels 2
Number of Circuits 2
Max Supply Voltage 16V
Min Supply Voltage 2.5V
Operating Supply Current 900nA
Nominal Supply Current 1.98μA
Power Dissipation 710mW
Output Current 200μA

TLV2402CDR Overview


The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Cut Tape (CT) case. It has 8 pins that make up the linear amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 1.2mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. The buffer amplifier is capable of operating from a supply current of 900nA . There should be no change in the voltage gain. This op amp contains 2 circuits. As far as the device is concerned, buffer amplifier has 2 channels. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. This instrumentation amplifier cannot operate below -40°C degrees Celsius. A temperature greater than 125°C should not be used for the operation of buffer amplifier. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of instrumentation amplifier is rated 8V voltage. A supply of 900nA or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 16V, and this is an excellent feature. To keep the buffer amps' supply voltage higher than 2.5V. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 8V volts. On the linear amplifier, there are 2 amplifiers that are used.

TLV2402CDR Features


120dB voltage gain
Output Type: Rail-to-Rail

TLV2402CDR Applications


There are a lot of Texas Instruments TLV2402CDR Instrumentational OP Amps applications.

  • Ultrasound transducers
  • Vehicle electronics
  • Switching amplifier
  • MP3
  • Inverse/same-phase proportional circuit
  • Industrial control system
  • Industrial applications including automation
  • Strain gauges
  • Television broadcasting equipment
  • Power control