TLV3404CDR

TLV3404CDR Overview

To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .Output type CMOS, Open-Drain is used for this comparator.This chip is designed with the Tape & Reel (TR) package.The comparator has 14 terminals.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 2.7V voltage.In general, the chip type can be classified as General Purpose .A total of 4 elements can be found in it.The device is equipped with 14 pins.The type of mounting recommended is Surface Mount .The operating temperature should be set to 0°C~70°C to avoid mal-function.This comparator has 14 pins.You can search TLV3404 if you are looking for more pin-to-pin solutions.There is 950nA current flowing in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 640nA .An excess of current supply over 640nA could result in malfunction of the comparator.Electronic comparator is sufficient to run the device wElectronic comparatorh +-1.25/+-8/2.5/16V power supplies.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 120dB .Comparator electronics is acceptable to pack the device by TR .

TLV3404CDR Features

CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 950nA
Voltage Gain: 120dB

TLV3404CDR Applications

There are a lot of Texas Instruments TLV3404CDR linear comparators applications.

• Zero-Crossing Detectors
• Mobile Phones and Tablets
• Hand-Held Electronics
• Handheld Instruments
• Mobile Phones
• Alarm and Monitoring Circuits
• High-Speed Sampling Circuits
• RC Timers
• Ultra-Low Power Systems
• Mobile Communications