TLV61046ADBVT

Description

For use in devices including PMOLED panels, LCD bias supplies, and sensor modules, the TLV61046ADBVT is a highly integrated boost converter. The TLV61046ADBVT combines a rectifier diode, an input to output isolation switch, and a 30-V power switch. When a Li+ battery or two alkaline batteries are connected in series as an input, it can output up to 28 V.

A switching frequency of 1.0 MHz is used by the TLV61046ADBVT during operation. Small external components can be used because of this. By connecting the FB pin to the VIN pin, the internal default 12-V output voltage setting of the TLV61046A can be accessed. In order to obtain 12-V output voltage, it simply requires three external components. The average 980-mA switch current limit for the TLV61046ADBVT. To lessen the inrush current, a 7-ms built-in soft-start time is included. To reduce leakage current when the TLV61046ADBVT is in shutdown mode, the isolation switch disconnects the output from the input. Additionally, the TLV61046ADBVT incorporates thermal shutdown, output short circuit protection, and output overvoltage protection.

In a 6-pin SOT23-6 package of 3 mm x 3 mm, the TLV61046ADBVT is offered.

Features

• Output short circuit protection

• Output overvoltage protection

• Thermal shutdown protection

• 3-mm × 3-mm SOT23-6 package

• Create a custom design using the TLV61046A with the WEBENCH? Power Designer

• ±2.5% output voltage accuracy

• Power save operation mode at light load

• Internal 7-ms soft start time

• True disconnection between input and output during shutdown

• Input voltage range: 1.8 V to 5.5 V, down to 1.6 V after start-up

• Output voltage up to 28 V

• Integrated power diode and isolation switch

• 980-mA (typical) switch current

• Up to 85% efficiency at 3.6-V input and 12-V output

Applications

• Wearable devices

• Portable medical equipment

• Sensor power supply

• PMOLED power supply

• LCD panel