TLV809K33DBVT

TLV809K33DBVT Overview

A total of 3 terminals are used to mount this power management. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 3 pins. 3 pins make up the power management. There should be a minimum voltage supply (Vsup) of 2V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supervisor's supply current is specified to 9μA. It is always advisable to use 809K33, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 25μA.

TLV809K33DBVT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current

TLV809K33DBVT Applications

There are a lot of Texas Instruments TLV809K33DBVT Voltage Supervisors applications.

• Medical-specific isolation transformer
• Functional modules
• Battery cars
• Military electronics
• Personal computers
• Refrigeration
• Digitally controlled LDO regulators circuit
• Utility meter
• Efficient information transmission
• Data storage applications