TLV809L30DBZR

TLV809L30DBZR Overview

A total of 3 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. The package peak reflow temperature is specified to be 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 3 pins on the board. There are 3 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2V. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. A similar IC managements number of the manufacturer can always be found by using 809L30, the base power ics number. Voltage supervisor can work with a supply temperature of 25μA at the most.

TLV809L30DBZR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2V

TLV809L30DBZR Applications

There are a lot of Texas Instruments TLV809L30DBZR Voltage Supervisors applications.

• Multi-voltage system
• Satellite navigation
• Low voltage/high power - AI, GPU
• Electronics installed in the vehicle
• Power distribution systems of CCU
• Electrical fire monitoring system
• DVR
• Medical-specific insulation monitor
• Solar power charger
• Detection of phase loss