TLV810ZDBZR

TLV810ZDBZR Overview

As you can see, this power management is mounted through 3 terminals. Packaging is in the form of a Tape & Reel (TR). Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 3.3V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 3 pins that are attached to IC management. 3 pins are present on the power management system. Supply voltage (Vsup) should be at least 1.1V for this power management. The supply voltage (Vsup) should not exceed 6V volts in this IC power. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a supply current of 20μA for the power management. For similar manage ics search of the manufacturer, you can always refer to TLV810, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 30μA.

TLV810ZDBZR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
20μA operating supply current

TLV810ZDBZR Applications

There are a lot of Texas Instruments TLV810ZDBZR Voltage Supervisors applications.

• Precision measurement
• Power distribution systems of operating room
• Leakage current detection
• Battery cars
• Low voltage/high power - AI, GPU
• Radio
• Detection of phase sequence
• Military communications
• Display equipment
• Solar power charger