TLV810ZDBZT

TLV810ZDBZT Overview

There are 3 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. There is a subcategory called Power Management Circuits for this power management. It has a total of 3 pins that are attached to IC management. 3 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. The supply voltage (Vsup) should not exceed 6V volts in this IC power. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For this power management, there is an 20μA volt supply current. You can always use TLV810, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 30μA can be used.

TLV810ZDBZT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
20μA operating supply current

TLV810ZDBZT Applications

There are a lot of Texas Instruments TLV810ZDBZT Voltage Supervisors applications.

• Electrical fire monitoring system
• Electronics installed in the vehicle
• Personal computers
• Radio
• Refrigeration
• Analog circuit
• Sensitive sensors
• Fire equipment power monitoring system
• Military electronics
• Smartphones