TP3067N/NOPB

TP3067N/NOPB Overview

As a space saver, it comes in the 20-DIP (0.300, 7.62mm) package. Tube is the packaging method used. Due to the fact that this part is of the type PCM, Filter, it is capable of delivering high-efficiency performance in a wide range of applications. The mounting type of this device is Through Hole. A -25°C~125°C operating performance setting allows it to operate normally. Integrated ADCs / DACs are available in 1 / 1. Supply voltage ±5V is provided to the analog circuit. In order to prevent signal reflections from off the end of the transmission line, 20 terminations are used. The device has a 20-pin configuration. There are 20 pins on it. Using its base part number TP3067, it can be used to locate parts that are related. Mounted on a PCB based on the technology of Through Hole. Supply voltage should never exceed 5.25V. Digital signals are converted from analog signals using 1 A/D converters. Subcategory Codecs applies to this electronic part. Maintaining a minimum voltage of 4.75V is recommended. In order to operate, it must be supplied with a voltage of 5V. It can be operated from a voltage of 5V. Digital signals are converted into analog signals using 2 D/A converters. Information is stored with 8 bits. There are -5V supply voltages that have a more negative polarity than the ground.

TP3067N/NOPB Features

Embedded in the 20-DIP (0.300, 7.62mm) package
Operating temperature of -25°C~125°C
1 / 1 ADCs / DACs
1 A/D converters

TP3067N/NOPB Applications

There are a lot of Texas Instruments TP3067N/NOPB CODECs Interface ICs applications.

• Digital systems
• Galvanometer scanners
• RF-based home automation system
• Full adders
• Addition
• Packaging
• Metal forming & fabrication
• Cut-to-length
• Automated Guided Vehicles (AGV)
• Textile manufacturing