TP3071N-G/NOPB

TP3071N-G/NOPB Overview

Space-saving reasons have led to it being packaged in a 20-DIP (0.300, 7.62mm) package. This package uses the Tube packaging method. This electronic component is of the type PCM, Filter, allowing it to provide high-efficiency performance in various applications. It employs Through Hole as its mounting type. It is able to operate normally when the operating performance is set at 0°C~70°C. The board is integrated with 1 / 1 ADCs and DACs. Supply voltage is 4.75V~5.25V for the analog circuit. 4.75V~5.25V provides the supply voltage to the digital circuit. In order to prevent signal reflections from off the end of the transmission line, 20 terminations are used. It is a kind of 20-pin electronic device. The pins are configured as 20. The base part number TP3071 can be used to find related parts. The chip is mounted to the PCB using the Through Hole technology. 5.25V should be the maximum value of the supply voltage. Digital signals are converted from analog signals using 1 A/D converters. The electronic part has been classified as Codecs. The minimum value of supply voltage should be maintained at 4.75V. There is 5V supply voltage for this device. Operating voltages as low as 5V can be used. A wide range of applications can be met by this electronic component belonging to the COMBO?II series. There is -5V supply voltage that has a less negative polarity than ground.

TP3071N-G/NOPB Features

Embedded in the 20-DIP (0.300, 7.62mm) package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs
1 A/D converters

TP3071N-G/NOPB Applications

There are a lot of Texas Instruments TP3071N-G/NOPB CODECs Interface ICs applications.

• Automation
• Mobile equipement
• Elevators
• Galvanometer scanners
• Textiles
• Translating the decimal values to the binary
• Aerospace
• Motor speed /RPM readout
• Data distribution
• Subtraction