TPIC6B273N

TPIC6B273N Overview

Package 20-DIP (0.300, 7.62mm) includes it. A Tube package is used to package it. In its configuration, Standard is used as the output. There is a logic type of D-Type Latch for this electrical device. According to Through Hole, this electronic part is mounted. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~125°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. This electronic part is designed with 8 Bits. This device is designed with 20 terminations. It is a member of the TPIC6B273 family. The supply voltage of the device is 5V. There are 20 pins attached to it. It is part of the family of electronic devices called 6B. In addition, it is designed with a pin number of 20. Through Hole is the method used for mounting this electronic part. Subcategory FF/Latches contains this part. A total of 5V power supplies are needed to run it. The output current of 150mA makes it feature maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 8 output lines. There are 1 elements in it. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.3mA. There is 1μA low level output current set. The high level output current is set to -1μA.

TPIC6B273N Features

20-DIP (0.300, 7.62mm) package
TPIC series
8 Bits
TPIC6B273 family
20 pin count
20 pins
5V power supplies
1 elements

TPIC6B273N Applications

There are a lot of Texas Instruments TPIC6B273N Latches applications.

• Clocks
• Buffer/Storage Registers
• General-Purpose Register
• Communication systems
• Shift left register
• Pattern generators
• Pattern Generators
• Hammer
• Phase comparator
• Programmable binary