All Products

TPS2010DG4

N-Channel PMIC TPS2010 8 Pin 3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-TPS2010DG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 922
  • Description: N-Channel PMIC TPS2010 8 Pin 3V 8-SOIC (0.154, 3.90mm Width) (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~125°C TJ
Packaging Tube
JESD-609 Code e4
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 75mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Base Part Number TPS2010
Pin Count 8
Number of Outputs 1
Output Type N-Channel
Max Output Current 200mA
Operating Supply Voltage 5.5V
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Nominal Supply Current 73μA
Output Configuration High Side
Output Current 200mA
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 73μA
Adjustable Threshold NO
Quiescent Current 73μA
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Min Current Limit 220mA
Fault Protection Current Limiting (Fixed), Over Temperature
Rds On (Typ) 75m Ω
Height 1.58mm
Length 4.9mm
Width 3.91mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2010DG4 Overview


The LED driver's packaged as a Tube.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.It is possible to use 1 outputs in the lighting driver.A voltage of Not Required is used to power it.Voltage output is N-Channel volts at maximum.There is a TPS2010 family of things that it belongs to.A total of 8 terminations can be found in it.For operation, we use the 8 pins.As far as functions are concerned, the lighting driver has 1.To meet the operation criteria, the maximum output current drops to 200mA.A supply voltage of 3V leads to high efficiency.A total of 8 pins are present on it.Lighting drivers with 75mOhm resistance are used.This results in a 200mA output current.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.Optimal efficiency requires a voltage of 5.5V.The maximum input voltage is 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.It requires 73μA current to operate.

TPS2010DG4 Features


Supplied from 3V
Resistance of 75mOhm
1 channels

TPS2010DG4 Applications


There are a lot of Texas Instruments TPS2010DG4 Power Switches ICs applications.

  • Wireless Modem Data Cards
  • Notebook and Tablet Computers
  • Wireless Headsets
  • Mobile Communication Devices
  • PC Cards
  • USB3.1 Power Delivery
  • Hot Swap
  • Hot Swaps
  • Portable Video Game Players
  • Portable GPS Device