TPS2110PWG4

TPS2110PWG4 Overview

The case comes with it. Packing the part in Tube cases is ideal. There are two ways in which this part is mounted. There is a voltage of 2.8V~5.5V applied to it. There must not be a minimum operating temperature of -40°C~85°C for this component. It is fitting for the component connected in Handheld/Mobile Devices. Source Selector Switch represents the device category. N-Channel is the type of FET. The part is available with 8 terminations. As you can see, it is designed with 8 pins. A part based on TPS2110 is used in this part. Powered by 2.8V, it is capable of delivering its performance to its customers. Run 260 using this part's peak reflow temperature. In order to run the supply current for the part at 55μA. This part is part of the Power Management Circuits family of parts. It is a part that has 8 pins in it. In order to conduct under 0.09mA, the supply current (Isup) should be conducted. The 1 outputs are available for use. It can work with voltages greater than 5.5VV as an input voltage. There are only a few chips on the market that can be used with an input voltage lower than 2.8V volts. Deliveries can be made under 750mA output current. The component can be delivered a current of 750mA as an output. With a supply voltage of 5.5V, this device can operate. During the running of the part, 2 inputs must be provided.

TPS2110PWG4 Features

in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs

TPS2110PWG4 Applications

There are a lot of Texas Instruments TPS2110PWG4 Ideal Diode controller applications.

• Active ORing for redundant power
• Asset tracker
• Automotive ADAS systems - camera
• Industrial motor drives
• ADAS domain controller
• Digital Cameras
• Factory automation and control - PLC digital output modules
• Power Tools
• Cell phones
• Reverse Polarity Protection