TPS2111APW

TPS2111APW Overview

The case is 8-TSSOP (0.173, 4.40mm Width)-shaped. The Tube case is ideal for packing the part. Mounting is done along the Surface Mount-axis. An electric current of 2.8V~5.5V is applied to it. It is essential that the minimal operating temperature of this component is not -40°C~85°C. The component connected to Handheld/Mobile Devices is a good match for this component. The device is categorized as Source Selector Switch. There is a N-Channel type of FET. The part comes with 8 terminations. The device is designed with 8 pins. Based on TPS2111, this part is manufactured. Powered by 2.8V, it delivers high performance. A maximum reflow temperature of this part is used if 260 is to be run. The purpose of this is to make sure that the supply current for the component at 55μA is running as it should be. As far as I know, the part belongs to the Power Management Circuits family. The part has 8 pins. Under 0.09mA, the supply current (Isup) should flow. In addition, there are 1 outputs available for use. Using the chip over 5.5V volts is allowed. It is possible to use the chip if the input voltage is less than 2.8V Volts. Under 1.25A output current, the part can be delivered. The component can be delivered a current of 1.25A as an output. It is possible for this device to operate at a voltage of 5.5V. In order for the part to run, it has 2 inputs. Device resistance should be kept within the range of 84mOhm.

TPS2111APW Features

in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs

TPS2111APW Applications

There are a lot of Texas Instruments TPS2111APW Ideal Diode controller applications.

• Automotive ADAS systems - camera
• Motor drives
• AC Rectifier
• Active ORing for redundant power
• Active ORing for redundant power supplies
• Industrial motor drives
• Asset tracker
• Building automation
• Automotive USB hubs
• Automotive battery protection