TPS2113PWG4

TPS2113PWG4 Overview

A 8-TSSOP (0.173, 4.40mm Width) case is included. Parts should be packed in Tube cases. Mounting is done along the Surface Mount-axis. With 2.8V~5.5V as its voltage, it is given a temperature of 0°C. A minimum operating temperature of -40°C~85°C must not be reached by this component. The component connected in Handheld/Mobile Devices is suitable for this component. It is classified as a Source Selector Switch device by the manufacturer. N-Channel is the type of FET. The part is available with 8 terminations. Pins are attached to it using 8 pins. TPS2113 is the base of this part. To deliver its performance, it's powered by the 2.8V platform. This part's peak reflow temperature is utilized to run 260. A Power Management Circuits family part is involved in the project. This part contains 8 pins that are located on the surface. In order to operate it, 55μA is used as the supply current. Current supply (Isup) must conduct under 0.09mA. In this case, 1 outputs are available. The chip can be used with an input voltage of more than 5.5V V. A voltage less than 2.8VV can be used to drive the chip. The part is capable of being delivered under 1.25A output current. 1.25A is the output current that can be delivered to the component in terms of its output voltage. There is no problem operating this device with a supply voltage of 5.5V. In order for the part to run, it has 2 inputs.

TPS2113PWG4 Features

in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs

TPS2113PWG4 Applications

There are a lot of Texas Instruments TPS2113PWG4 Ideal Diode controller applications.

• Active OR-ing of Redundant (N+1) Power Supplies
• Power Tools
• Automotive USB hubs
• PDAs
• Reverse Polarity Protection
• Camera ECU
• MP3 Players
• Active ORing for redundant power supplies
• Factory automation and control - PLC digital output modules
• USB HUBs