TPS2114APWR

TPS2114APWR Overview

A 8-TSSOP (0.173, 4.40mm Width) case is included. It is suited to pack the part in Tape & Reel (TR) case. There is a Surface Mount-axis mounted on the part. It is given a voltage of 2.8V~5.5V. It is not allowed for this component to operate below -40°C~85°C degrees. It is designed to fit the component that is connected in Handheld/Mobile Devices position. Source Selector Switch is the category for the device. In the case of FETs, N-Channel is recognized as the type. The part is available with 8 terminations as an option. 8 pins are used in the design. Based on TPS2114, this part is manufactured. 2.8V provides its performance. In order to run 260, a part's peak reflow temperature is utilized. Run the supply current of the part at 55μA. As far as I know, the part belongs to the Power Management Circuits family. Among the pins on the part are 8 pins. It should be possible to conduct the supply current (Isup) under 0.09mA. In this case, 1 outputs are available. An input voltage of more than 5.5V V can be used with the chip. A voltage less than 2.8VV can be used to drive the chip. In terms of output current, the part can be delivered under 750mA output current. As a result, 750mA is the maximum output current that can be delivered to the component. In order for this device to function, it requires a supply voltage of 5.5V. For this part to run, 2 inputs are required. This device's maximum output voltage is 6V. Keeping the device resistance within 120mOhm is recommended.

TPS2114APWR Features

in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs

TPS2114APWR Applications

There are a lot of Texas Instruments TPS2114APWR Ideal Diode controller applications.

• Electricity meters
• Digital Radios
• Automotive ADAS systems - camera
• Motor drives
• AC Rectifier
• Building automation
• Camera ECU
• Active ORing for redundant power
• Asset tracker
• Electronic point of sale