English

All Products

View All >>
  • TPS22913BYZVT

TPS22913BYZVT

P-Channel 0.5mm Copper, Silver, Tin PMIC TPS22913 4 Pin 1.5V 4-XFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-TPS22913BYZVT
  • Package: 4-XFBGA, DSBGA
  • Datasheet: -
  • Stock: 409
  • Description: P-Channel 0.5mm Copper, Silver, Tin PMIC TPS22913 4 Pin 1.5V 4-XFBGA, DSBGA (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time 6 Weeks
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Contact Plating Copper, Silver, Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-XFBGA, DSBGA
Number of Pins 4
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e1
Feature Load Discharge, Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Resistance 120mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory Peripheral Drivers
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.5V
Terminal Pitch 0.5mm
Base Part Number TPS22913
Pin Count 4
Number of Outputs 1
Output Type P-Channel
Operating Supply Voltage 5.5V
Voltage 5.5V
Interface On/Off
Current 2A
Output Configuration High Side
Output Current 2A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 10μA
Quiescent Current 2μA
Input Type Non-Inverting
Turn On Delay Time 234 μs
Switch Type General Purpose
Min Input Voltage 1.4V
Max Input Voltage 5.5V
Output Characteristics OPEN-DRAIN
Nominal Input Voltage 5.5V
Turn-Off Delay Time 17 μs
Ratio - Input:Output 1:1
Input Characteristics STANDARD
Voltage - Load 1.4V~5.5V
Driver Number of Bits 1
Fault Protection Reverse Current, UVLO
Rds On (Typ) 60m Ω
Built-in Protections TRANSIENT; UNDER VOLTAGE
Height 500μm
Length 0m
Width 0m
Thickness 350μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS22913BYZVT Overview


It's?packaged?in?the way?of?a?Tape & Reel (TR).It's included in the 4-XFBGA, DSBGA package.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.There are 1 outputs available on this lighting driver.A voltage of Not Required is used to power it.A maximum output voltage of P-Channel volts has been specified.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.It comes under the family of TPS22913.There are 4 terminations in it.The operation is carried out using the 4 pins.Currently, the lighting driver has a total of 1 functions.It is possible to obtain high efficiency with a supply voltage of 1.5V.Surface Mount is mounted in the way.4 pins are equipped with it.Lighting drivers with 120mOhm resistance are used.In this case, the output current will be set to 2A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.It has a maximum input voltage of 5.5V volts.The input voltage minimum is 1.4V volts.For its operation, a current of 10μA is required.

TPS22913BYZVT Features


Supplied from 1.5V
Resistance of 120mOhm

TPS22913BYZVT Applications


There are a lot of Texas Instruments TPS22913BYZVT Power Switches ICs applications.

  • Portable Music Players
  • Portable/Handheld Devices
  • PC Cards
  • Notebook and Tablet Computers
  • Smart Phones, Feature Phones
  • Wearable Devices
  • Storage Drives
  • USB Power Distribution
  • Various applications equipped with buttons
  • Wireless/Networking Cards