TPS22921YFPR

TPS22921YFPR Overview

It is packaged in the form of a Tape & Reel (TR).The 6-XFBGA, DSBGA package includes it.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.Voltage output is P-Channel volts at maximum.In terms of features, the LED driving board has Slew Rate Controlled.It is part of the TPS22921 family of LED drivers.A total of 6 terminations have been found in it.The 6 pins are used to operate the LED driver.Currently, the lighting driver has a total of 1 functions.The maximum output current is reduced to 2A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 1V.There are 6 pins in total on this board.There is 170mOhm resistance on the LED driver.In this case, the output current is set to 2A.Normal operation requires Vsup above 0.9V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.In order to optimize the efficiency of the supply voltage, it should be set to 3.6V.A maximum input voltage of 3.6V volts can be applied to it.As far as input voltage goes, it has a minimum of 750mV volts.A maximum current requirement of 800nA is required for its operation.

TPS22921YFPR Features

Supplied from 1V
Resistance of 170mOhm
1 channels

TPS22921YFPR Applications

There are a lot of Texas Instruments TPS22921YFPR Power Switches ICs applications.

• Handheld Devices
• Various applications equipped with buttons
• Telecom and Network Systems
• Set-Top Boxes
• Storage (HDDs, SSDs)
• Portable GPS
• Wireless Modem Data Cards
• HDD and SSD
• Hot Swap
• PDAs