TPS2306DW

TPS2306DW Overview

In the 16-SOIC (0.295, 7.50mm Width) package you will find it.In the current state, 2 channels are accessible.It's packaged in a Tube shape.Hot-swappable device terminates wHot-swappable deviceh 16 in total.Its terminal position is DUAL.The device has a total of 16 pins.An efficient supply voltage is possible with 12V.As Surface Mount would say, it's set up like that.Hot Swap Controller, Sequencer?is?the?classification?for?this?electrical?component.A reliable operation requires the temperature to be set to -40°C~85°C.Application General Purpose is available on the device.The article is featured in Latched Fault, UVLO.If the power source is 2.75V~13.6VV, it should work fine.The TPS2306 family includes it.There is nothing else in Power Management Circuits but this gadget.Among its programmable features are Circuit Breaker, Fault Timeout, Slew Rate.Presently, there is a sufficient supply of 2mA.There is a Surface Mount axis pointing in the direction of the object.In order for a device to operate normally, the supply voltage (Vsup) must be higher than 4V.Vsup (maximum supply voltage) is set to 13.6V.Hot-swappable device has a 4/13.6V power supply, which is the power supply used in the part.The maximum supply current it requires to operate is 4mA.Using this device, UNDER VOLTAGE LOCKOUT can also be produced.

TPS2306DW Features

The terminal position of 16
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate

TPS2306DW Applications

There are a lot of Texas Instruments TPS2306DW hot swap controllers applications.

• Redundant-array-of-independent-disk (RAID) storage
• Short-circuit protection in real time
• Reverse current protection
• Temperature monitor output
• Circuit power protectors
• Distributed power systems
• Industrial high-side switches
• PC board hot swap insertion and removal
• Active current limit
• Circuit breakers for high-side circuits