TPS2330IPWG4

TPS2330IPWG4 Overview

As part of the 14-TSSOP (0.173, 4.40mm Width) package, it is included.Currently, there are 1 channels accessible.A Tube-shaped package holds it.Total terminations are 14.Device DUAL is located at the terminal position.The device has a total of 14 pins.A supply voltage of 4.5V allows for high efficiency.In the way of Surface Mount, it's set up.Electrical components classified as Hot Swap Controller are referred to as Hot Swap Controller components.To ensure reliable operation, set the temperature to -40°C~85°C.Devices with General Purpose applications are available.Latched Fault, UVLO features it.As long as you have a 3V~13VV power source, it should work.The number TPS2330 belongs to the TPS2330 family.14 pins are used in operation.Power Management Circuits contains this gadget all by itself.There are Circuit Breaker, Fault Timeout, Slew Rate programmable features on this device.500μA is currently in short supply.Positioned in direction of Surface Mount, it is at a right angle.For normal operation, Vsup should be kept above 3V.During operation, it will require a maximum current of 1mA.By using this device, it is also possible to produce REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2.There is no problem with a 21V output voltage if you want high efficiency.

TPS2330IPWG4 Features

The terminal position of 14
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate
Output voltage of 21V

TPS2330IPWG4 Applications

There are a lot of Texas Instruments TPS2330IPWG4 hot swap controllers applications.

• Overvoltage protection
• Redundant Array of Disks (RAID)
• Power supply hotswap & inrush control
• Remote access server
• High power circuit board
• Other forms of communications infrastructure
• Telecommunications
• Limitting the inrush current
• Modern analog communication
• Industrial