TPS2377D-1

TPS2377D-1 Overview

The package Tube includes it as part of PoE controller.It is packaged in the way of 8-SOIC (0.154, 3.90mm Width).I would like to inform you that this PoE controller is of the Controller (PD) type.The number of channels is growing strong/weak: 1.In order to ensure its reliability, PoE operates at the operating temperature of -40°C~85°C.In this electrical Po E controller, the voltage of the supply is 0V~57V.A part number's Po E controllers of TPS2377 can be determined by its base number.A 8 termination involves terminating a transmission line with a power over ethernet controller whose characteristic impedance matches the line's.There are 8 pins on it.This Po E controller is included in Power Management Circuits.8 pins are used in the design of this board.The peak reflow temperature (Cel) of this electrical ethernet power controller is 260.It is necessary to have a greater voltage than 48V in the supply.In order for it to operate, it needs the maximum current (Isup) 0.35mA.As a requirement for 240μA to function properly, it must be supplied with a current.The output current of 350mA makes it feature maximum design flexibility.PoE controllers operate at 57V volts.A resistance of 1Ohm (*) is measured on this PoE controller.The output power of this ethernet over power controller is 12.95W.

TPS2377D-1 Features

Tube package
8 pin count
8 pins
The output current of 350mA
1Ohm (Ω)

TPS2377D-1 Applications

There are a lot of Texas Instruments TPS2377D-1 Power Over Ethernet (PoE) Controllers applications.

• Routers
• IP Phone Power Management
• PoE powered device appliances
• VoIP Phones
• IEEE 802.3af Compliant PoE Powered Devices
• Public Information Displays
• RFID Readers
• Midspan Applications
• WLAN Access Points
• Power over Ethernet