TPS2410PW

TPS2410PW Overview

There is a 14-TSSOP (0.173, 4.40mm Width) case that comes with it. In Tube cases, it is convenient to pack the part. Surface Mount is the way the part is mounted. The voltage is set to 3V~16.5V. It is essential that the minimal operating temperature of this component is not -40°C~85°C. It fits perfectly with the component connected to N+1 Power Supplies, High Availability. N+1 ORing Controller represents the device category. In this case, the FET type can be recognized as N-Channel. In this part, there are 14 terminations. Pins are attached to it using 14 pins. As you can see, this part is based on TPS2410. It is powered by 5V to deliver its perfomance. For the purpose of running 260, this part's peak reflow temperature is utilized. The purpose of this is to run the supply current for the part at 4.25mA in order to run it correctly. Part of the Power Management Circuits family. Among the pins on the part are 14 pins. This part should have a voltage supply of at least 3V (Vsup). It can work with voltages greater than 16.5VV as an input voltage. There are certain situations in which the chip can be used with input voltages as low as 800mV V. This device has a maximum output voltage of 10.2V. In order to operate, it uses a quiescent current at 1.2mA.

TPS2410PW Features

in a 14-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
14 terminations
Peak Reflow Temperature (Cel) : 260

TPS2410PW Applications

There are a lot of Texas Instruments TPS2410PW Ideal Diode controller applications.

• MP3 Players
• Active OR-ing of Redundant (N+1) Power Supplies
• Active ORing for redundant power
• PDAs
• Building automation
• Asset tracker
• Alternator
• Electricity meters
• Industrial motor drives
• Power supply reverse polarity protection