TPS24742RGET

TPS24742RGET Overview

This is included in the 24-VFQFN Exposed Pad package.Hot-swappable device is currently possible to access 1 channels.It's?packaged?in?the?form?of?a?Tape & Reel (TR).The 24 terminations total to three.In this case, the device is located at terminal QUAD.Surface Mount sets it up.Electrical components classified as Hot Swap Controller, OR Controller are referred to as Hot Swap Controller, OR Controller components.To ensure reliable operation, the temperature should be set to -40°C~125°C.General Purpose applications can be downloaded from the device.A feature of Latched Fault, UVLO describes it.In the case of a 2.5V~18VV power source, it should work just fine.There are numbers in the TPS24742 family that include it.This device uses 24 pins for operation.Current Limit, Fault Timeout, OVP, Turn On Voltage features are programmable.Surface Mount directs its position.For normal operation, Vsup should be kept above 2.5V.Hot Swap can operate at a maximum supply current of 6mA.There is a supply current of 4.2mA.

TPS24742RGET Features

Features of Latched Fault, UVLO
Programmable features of Current Limit, Fault Timeout, OVP, Turn On Voltage

TPS24742RGET Applications

There are a lot of Texas Instruments TPS24742RGET hot swap controllers applications.

• Circuit breakers for high-side circuits
• Hard drive
• Redundant Array of Disks (RAID)
• Industrial
• Active current limit
• Industrial computers and servers
• Firewire
• Inrush current control
• Raid
• Redundant-array-of-independent-disk (RAID) storage