TPS24750RUVT

TPS24750RUVT Overview

You can find it in the 36-VFQFN Exposed Pad package.In the current state, 1 channels are accessible.Tape & Reel (TR)-shaped packaging is used for this product.In total, it has 36 terminations.There is a QUAD terminal position on the device.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 12V.This is set up in the same way as Surface Mount.An electrical component classified as Hot Swap Controller belongs to this category.For reliable performance, the temperature should be set to -40°C~85°C.The device has General Purpose applicationsThe article appears in Latched Fault, Thermal Limit.Hot-swappable device should work if you use a 2.5V~18VV power source.There are numbers in the TPS24750 family that include it.Operating the device requires 36 pins.Power Management Circuits contains this gadget on its own.Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO features are programmable.There is a Surface Mount-axis orientation to it.For normal operation, Vsup should be kept above 2.5V.In this case, 1mA is the operative supply current.In order to meet the operation criteria, the maximum output current must be reduced to 12A.

TPS24750RUVT Features

Features of Latched Fault, Thermal Limit
Programmable features of Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO

TPS24750RUVT Applications

There are a lot of Texas Instruments TPS24750RUVT hot swap controllers applications.

• Automatic restart after load failure
• Overcurrent protection
• Continuous monitoring of device temperature
• Limitting the inrush current
• Networking
• Overvoltage protection
• Thermal limitation
• Automotive circuits
• Power monitoring
• Industrial computers and servers