TPS2483PW

TPS2483PW Overview

In the 20-TSSOP (0.173, 4.40mm Width) package you will find it.At the moment, there are 1 channels available.There is a Tube-shaped package for it.Total terminations are 20.In this case, the device is located at terminal DUAL.High efficiency can be achieved when the supply voltage is 48V.In the way of Surface Mount, it's set up.This electrical component belongs to the Hot Swap Controller, Monitor classification.If you want reliable performance, you should set the temperature to -40°C~85°C.There are General Purpose applications on the device.A feature of Auto Retry, I2C, UVLO describes it.As long as you have a 9V~80VV power source, it should work.TPS2483 is a family of numbers.Operating the device requires 20 pins.There is nothing else in Power Management Circuits but this gadget.Current Limit, Fault Timeout is its programmable feature.The position of the object is in the direction of Surface Mount.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 9V in order to maintain normal operation.Set Vsup to 80V for maximum supply voltage.In terms of power supplies, it is the character 9/80V that appears on the part.Currently, 2mA is the supply current.Through the use of this device, ALSO OPERATES WITH SUPPLY VOLTAGE 2.7 TO 5.5V can also be produced.

TPS2483PW Features

Features of Auto Retry, I2C, UVLO
Programmable features of Current Limit, Fault Timeout

TPS2483PW Applications

There are a lot of Texas Instruments TPS2483PW hot swap controllers applications.

• Thermal limitation
• Continuous monitoring of device temperature
• Current monitoring
• Inrush current control
• Modern analog communication
• Redundant negative voltage supplies
• Current monitor output
• Safe board insertion and extraction
• Networking
• Current limit and current foldback limit functions