Products
You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The
basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and
country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.Parameters | |
---|---|
Interface | On/Off |
Output Configuration | High Side |
Power Dissipation | 1.19W |
Output Current | 3A |
Voltage - Supply (Vcc/Vdd) | Not Required |
Switch Type | General Purpose |
Nominal Input Voltage | 8V |
Ratio - Input:Output | 1:1 |
Voltage - Load | 1.2V~8V |
Number of Drivers | 2 |
Rds On (Typ) | 32m Ω |
Built-in Protections | TRANSIENT |
Height | 1.1mm |
Length | 2.9mm |
Width | 1.6mm |
Thickness | 870μm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
Factory Lead Time | 6 Weeks |
Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | SOT-23-6 Thin, TSOT-23-6 |
Number of Pins | 6 |
Weight | 36.003894mg |
Operating Temperature | -40°C~85°C TA |
Packaging | Cut Tape (CT) |
JESD-609 Code | e3 |
Feature | Slew Rate Controlled |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 6 |
ECCN Code | EAR99 |
Resistance | 82mOhm |
Terminal Finish | Matte Tin (Sn) |
Max Power Dissipation | 1.19W |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 5V |
Terminal Pitch | 0.95mm |
Base Part Number | TPS27081 |
Number of Outputs | 1 |
Max Output Current | 3A |
Supply Voltage-Max (Vsup) | 8V |
Supply Voltage-Min (Vsup) | 1V |
The TPS27081ADDCR is a high-side Load Switch that features industry-standard ESD protection on all pins providing better ESD compatibility with other onboard components. The TPS27081A level shifts ON/OFF logic signal to VIN levels and support as low as 1-V CPU or MCU logic to control higher voltage power supplies without requiring an external level-shifter. Switching a large value output capacitor CL through a fast ON/OFF logic signal may result in an excessive inrush current. To control the load inrush current, connect a resistor R2 and add an external capacitor C1 as shown in the Simplified Schematic in the Technical Data Sheet. To configure the TPS27081A to achieve a specific slew rate, refer to the Application and Implementation section. A single pull-up resistor R1 is required in standby power switch applications. In such applications connect the R2 pin of the TPS27081A to the system ground when inrush current control is not required.
Adjustable turn-on and turnoff slew rate control through external R1, R2, and C1
Supports a wide range of 1.2 to 8V supply inputs
Integrated NMOS for PFET control
Full ESD protection (all pins)
Low ON-resistance, high-current PFET
Ultralow leakage current in standby (typical 100nA)
Industrial, Power Management
Products