TPS2829DBVR

TPS2829DBVR Overview

For greater flexibility, the SC-74A, SOT-753 package is adopted.Cut Tape (CT) represents the package.The device is mounted in the direction of Surface Mount.A supply voltage of 4V~14V demonstrates its superiority.The gate type on this device is N-Channel MOSFET.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TA.Mosfet driver uses Non-Inverting as Mosfet drivers input type.There are 5 terminations to form the base of its configuration.The base part number TPS2829 refers to a number of related parts.You mount it with Surface Mount.The pins are configured with 5 when designing the chip.Mosfet driver is designed specifically to run on 10V volts of power.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.In the maximum case, the output current can be limited to 2A.Several electronic components are included in its subcategory of MOSFET Drivers.On the board, there are 5 component pins.For its basis, 1 outputs are integrated.An output current of 2A is supported.Based on its maximum power dissipation of 437mW, it is clear that it is capable of transferring and conducting power loss without overheating.

TPS2829DBVR Features

Embedded in the Cut Tape (CT) package
Employing a gate type of N-Channel MOSFET
5 pins
Maximum power dissipation of 437mW

TPS2829DBVR Applications

There are a lot of Texas Instruments TPS2829DBVR gate drivers applications.

• Portable Navigation Devices
• Dual-Battery Systems
• 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
• Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
• Active filtering
• Industrial motor drives - compact, standard, premium, servo drives
• Isolated Gate Driver Supplies
• Solar inverters
• Isolated Supplies for controller area network (CAN),
• Topologies