TPS3103E15DBVR

TPS3103E15DBVR Overview

It is mounted through 6 terminals on the power management. Packaged in the form of a Cut Tape (CT), power management is easy to use. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a SOT-23-6 package. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The package peak reflow temperature is specified to be 260. When 1.5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 6 pins on IC management. 6 pins are on the supervisor. It is recommended that Vsup should not be less than 400mV for this IC power. The supply voltage (Vsup) should not exceed 3.3V volts in this IC power. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TJ degrees. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The power management's supply current is 1.2μA. A similar IC managements number of the manufacturer can always be found by using TPS3103E15, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 27μA.

TPS3103E15DBVR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current

TPS3103E15DBVR Applications

There are a lot of Texas Instruments TPS3103E15DBVR Voltage Supervisors applications.

• Analog circuit
• Leakage current detection
• Satellite navigation
• Refrigeration
• Automotive permanent magnet synchronous motors
• Stable power system
• DC stabilized power supply module
• Personal computers
• Sensitive sensors
• Data storage applications