TPS3307-25DGNG4

TPS3307-25DGNG4 Overview

As you can see, this power management is mounted through 8 terminals. In terms of packaging, power management follows the Tube model. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 3 channels. For your reference, this PMIC includes a list of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad functions. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. Manage ics operate at 3.3V supply voltages. In a 3 supply voltage, the PMIC chip conducts. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 8 pins on power management. 8 pins make up the power management. It is recommended that Vsup should not be less than 2V for this IC power. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 15μA. A similar IC managements number of the manufacturer can always be found by using TPS3307, the base power ics number. Voltage supervisor can work with a supply temperature of 40μA at the most.

TPS3307-25DGNG4 Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2V
15μA operating supply current

TPS3307-25DGNG4 Applications

There are a lot of Texas Instruments TPS3307-25DGNG4 Voltage Supervisors applications.

• DVR
• Kitchen appliances
• Analog circuit
• Smartphones
• Detection of phase loss
• Dash board
• DC stabilized power supply module
• Unattended substation automation
• Data storage applications
• Detection of phase imbalance