TPS3307-33DG4

TPS3307-33DG4 Overview

There are 8 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tube way. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 3 channels on this supervisor, and they are arranged in a series. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 3.3V volt supply. Power ics operate at 3 supply voltages. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 8 pins on the board. 8 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. It is estimated that the voltage supervisor's supply current is 15μA. Additionally, IC management are a variety of features, for example [0], to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3307, which is the base power ics number. At the most, voltage supervisor can work with a supply temperature of 40μA.

TPS3307-33DG4 Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2V
15μA operating supply current

TPS3307-33DG4 Applications

There are a lot of Texas Instruments TPS3307-33DG4 Voltage Supervisors applications.

• Embedded computing
• Multi-voltage system
• Computer applications
• Linux and server computing
• Low voltage/high power - AI, GPU
• Network equipment
• Radio
• Satellite navigation
• Utility meter
• Power distribution systems of ICU