TPS3610U18PW

TPS3610U18PW Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 14 in total. A Tube package is used to package the power management. Power management is possible to find a series of 1 functions. Power management consists of 2 channels, each of which can be used independently. To assist you, this PMIC includes 14-TSSOP (0.173, 4.40mm Width) functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. IC management is specified that the package peak reflow temperature should be 260. In a 1.8V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 14 pins. 14 pins are present on the power management system. It is recommended that Vsup should not be less than 1.65V for this IC power. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 20μA. For similar manage ics search of the manufacturer, you can always refer to TPS3610U18, the base PMIC number. At the most, voltage supervisor can work with a supply temperature of 40μA.

TPS3610U18PW Features

Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current

TPS3610U18PW Applications

There are a lot of Texas Instruments TPS3610U18PW Voltage Supervisors applications.

• Sensitive sensors
• Satellite navigation
• Utility meter
• emergency room
• Linux and server computing
• DSP
• Electronics installed in the vehicle
• Detection of phase loss
• Network equipment
• Insulation fault location system