TPS3805H33DCKRG4

TPS3805H33DCKRG4 Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for 5-TSSOP, SC-70-5, SOT-353 functions. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. When a supply voltage of 2 is applied to the power ic, it conducts. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. 5 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.3V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 3μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3805H33, which is the base power ics number. The power management can work with a maximum supply temperature of 6μA.

TPS3805H33DCKRG4 Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1.3V
3μA operating supply current

TPS3805H33DCKRG4 Applications

There are a lot of Texas Instruments TPS3805H33DCKRG4 Voltage Supervisors applications.

• Battery cars
• Radio
• Computer applications
• FPGA design
• Power distribution systems of CCU
• Leakage protection
• Military communications
• Stable power system
• Analog circuit
• Important electronics for automotive protection