TPS3808G09DBVR

TPS3808G09DBVR Overview

There are 6 terminals on this power management that allow it to be mounted. There is a Cut Tape (CT)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find SOT-23-6 functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 260. IC management conducts at a voltage of 3.3V. A supply voltage of 1 is used to conduct the PMIC chip. The power management system can be categorized as a Power Management Circuits chip. It has a total of 6 pins that are attached to IC management. 6 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.65V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 6.5V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TJ. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 2.4μA. You can always use TPS3808G09, the base supervisor number, to search for similar PMICs of the manufacturer.

TPS3808G09DBVR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current

TPS3808G09DBVR Applications

There are a lot of Texas Instruments TPS3808G09DBVR Voltage Supervisors applications.

• Cloud computing
• Consumer electronics
• Microcontroller system
• Military electronics
• Detection of phase loss
• Microprocessor system
• Magnetic resonance imaging
• Power distribution systems of CCU
• Satellite navigation
• Rechargeable batteries