TPS3808G09DBVT

TPS3808G09DBVT Overview

There are 6 terminals on this power management that allow it to be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this PMIC, you can find SOT-23-6 functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 3.3V volt supply. In a 1 supply voltage, the PMIC chip conducts. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 6 pins are located on this power management. Pin count of the power management is 6. IC management can only work with a supply voltage of 1.65V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 6.5V volts. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TJ. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The power management's supply current is 2.4μA. A similar IC managements number of the manufacturer can always be found by using TPS3808G09, the base power ics number.

TPS3808G09DBVT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current

TPS3808G09DBVT Applications

There are a lot of Texas Instruments TPS3808G09DBVT Voltage Supervisors applications.

• Power distribution systems of CCU
• Solar power charger
• Unattended substation automation
• Transformer load monitoring equipment
• Dash board
• Leakage protection
• Smartphones
• Telecommunications equipment
• Power distribution systems of operating room
• Urban rail transit weak current power monitoring