TPS3808G18DBVT

TPS3808G18DBVT Overview

There are 6 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes SOT-23-6 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 3.3V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. There is a subcategory of this power ic known as Power Management Circuits. 6 pins are present in total in this power management. 6 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.65V. There should be no more than 6.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~125°C TJ. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 2.4μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using TPS3808G18, the base power ics number.

TPS3808G18DBVT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current

TPS3808G18DBVT Applications

There are a lot of Texas Instruments TPS3808G18DBVT Voltage Supervisors applications.

• Smart meter
• Efficient information transmission
• Detection of phase loss
• Set top box
• Digitally controlled LDO regulators circuit
• DSP
• Electrical fire monitoring system
• Fire equipment power monitoring system
• DC stabilized power supply module
• Electric heating appliances