TPS3808G25DRVRG4

TPS3808G25DRVRG4 Overview

As you can see, this power management is mounted through 6 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. In this IC management you will find 6-WDFN Exposed Pad functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 3.3V-voltage supply. Power management conducts at a voltage of 1. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 6 pins in it. 6 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 1.65V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 6.5V volts in this IC management. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TJ. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 2.7μA. You can always use TPS3808G25, the base supervisor number, to search for similar PMICs of the manufacturer.

TPS3808G25DRVRG4 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.7μA operating supply current

TPS3808G25DRVRG4 Applications

There are a lot of Texas Instruments TPS3808G25DRVRG4 Voltage Supervisors applications.

• Military communications
• Multi-voltage system
• Dash board
• Leakage protection
• Transformer load monitoring equipment
• Battery-powered equipment
• Power distribution systems of infant care room
• DSP
• Urban rail transit weak current power monitoring
• Telecommunications equipment