TPS3808G25DRVT

TPS3808G25DRVT Overview

There are 6 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. Please find attached 6-WDFN Exposed Pad functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 3.3V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 6 pins on IC management. There are 6 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.65V volts. There should be no more than 6.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TJ. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. For this power management, there is an 2.7μA volt supply current. For similar manage ics search of the manufacturer, you can always refer to TPS3808G25, the base PMIC number.

TPS3808G25DRVT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.7μA operating supply current

TPS3808G25DRVT Applications

There are a lot of Texas Instruments TPS3808G25DRVT Voltage Supervisors applications.

• DVR
• Telecommunications equipment
• Military communications
• Battery cars
• Medical-specific isolation transformer
• FPGA design
• Battery-powered equipment
• Detection of phase loss
• Cloud computing
• Leakage protection