TPS3808G30DBVT

TPS3808G30DBVT Overview

Power management is mounted through 6 terminals. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes SOT-23-6 functions for your convenience. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 3.3V-voltage supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 6 pins on the board. The pins of the power management system count 6. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.65V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 6.5V volts in this IC power. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TJ. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supervisor's supply current is specified to 2.4μA. In addition, IC management are other features such as [0], to mention only a few. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3808G30, which is the base power ics number.

TPS3808G30DBVT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current

TPS3808G30DBVT Applications

There are a lot of Texas Instruments TPS3808G30DBVT Voltage Supervisors applications.

• Utility meter
• Power communication system
• Battery cars
• Cloud computing
• Multi-voltage system
• Military communications
• Solar power charger
• Consumer electronics
• Rechargeable batteries
• Electronics installed in the vehicle