TPS3808G30DBVTG4

TPS3808G30DBVTG4 Overview

This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. To assist you, this IC power includes 1 functions. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes SOT-23-6 functions for your convenience. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is specified that the package peak reflow temperature should be 260. When 3.3V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 6 pins that are attached to IC management. This power management has 6 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.65V. Voltage (Vsup) shouldn't exceed 6.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TJ. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a supply current of 2.4μA for the power management. Among other features, IC power can be also taken advantage of [0], for instance. You can always use TPS3808G30, the base supervisor number, to search for similar PMICs of the manufacturer.

TPS3808G30DBVTG4 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current

TPS3808G30DBVTG4 Applications

There are a lot of Texas Instruments TPS3808G30DBVTG4 Voltage Supervisors applications.

• Smartphones
• Utility meter
• Embedded computing
• Radar
• Power distribution systems of CCU
• Electrical fire monitoring system
• Leakage current detection
• Analog circuit
• Detection of phase sequence
• Set top box