TPS3818G25DRVR

TPS3818G25DRVR Overview

As you can see, this power management is mounted through 6 terminals. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes 6-WDFN Exposed Pad functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. In a 3.3V supply voltage, the power management conducts. Power management conducts at a voltage of 1. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 6 pins on the board. Pin count of the power management is 6. Supply voltage (Vsup) should be at least 1.7V for this power management. The supply voltage (Vsup) should not exceed 6.5V volts in this IC power. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~125°C TJ. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The power management's supply current is 2.7μA. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGE IS 2.5V; MANUAL RESET INPUT; POWER ON RESET GENERATOR to name a few. A similar IC managements number of the manufacturer can always be found by using TPS3818G25, the base power ics number.

TPS3818G25DRVR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.7V
2.7μA operating supply current

TPS3818G25DRVR Applications

There are a lot of Texas Instruments TPS3818G25DRVR Voltage Supervisors applications.

• Power distribution systems of ICU
• FPGA design
• Transformer load monitoring equipment
• Digitally controlled LDO regulators circuit
• Personal computers
• Analog circuit
• Solar power charger
• Rechargeable batteries
• Stable power system
• DSP