TPS3823-50DBVR

TPS3823-50DBVR Overview

A total of 5 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. IC management is packaged as a SC-74A, SOT-753 package. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 5V. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 5 pins are located on this power management. This power management has 5 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The power management's supply current is 15μA. It is always advisable to use TPS3823, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 25μA.

TPS3823-50DBVR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current

TPS3823-50DBVR Applications

There are a lot of Texas Instruments TPS3823-50DBVR Voltage Supervisors applications.

• Multi-voltage system
• Power distribution systems of operating room
• Embedded computing
• Battery cars
• Power communication system
• Solar power charger
• Battery cars
• Precision measurement
• Radar
• Microprocessor system