TPS3831G12DQNT

TPS3831G12DQNT Overview

It is mounted through 4 terminals on the power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a 4-XDFN Exposed Pad package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a specification for the peak reflow temperature of the package to be 260. During operation, the power ic is supplied with a voltage of 1. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. 4 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 600mV volts. Voltage (Vsup) shouldn't exceed 6.5V volts in this PMIC. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 150nA. A similar IC managements number of the manufacturer can always be found by using TPS3831G12, the base power ics number. A maximum supply temperature of 500nA can be used.

TPS3831G12DQNT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 600mV
150nA operating supply current

TPS3831G12DQNT Applications

There are a lot of Texas Instruments TPS3831G12DQNT Voltage Supervisors applications.

• Embedded computing
• Unattended substation automation
• Power distribution systems of CCU
• Detection of phase sequence
• Transformer load monitoring equipment
• emergency room
• Battery cars
• Leakage protection
• Radio
• FPGA design