TPS3831K33DQNR

TPS3831K33DQNR Overview

Power management is mounted through 4 terminals. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. In this IC management you will find 4-XDFN Exposed Pad functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. As specified in the package specification, the peak reflow temperature of the package is set at 260. Power ics operate at 1 supply voltages. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. 4 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 600mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6.5V volts. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 150nA. It is always advisable to use TPS3831K33, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 500nA.

TPS3831K33DQNR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 600mV
150nA operating supply current

TPS3831K33DQNR Applications

There are a lot of Texas Instruments TPS3831K33DQNR Voltage Supervisors applications.

• Digitally controlled LDO regulators circuit
• Microprocessor system
• Electronics installed in the vehicle
• Network equipment
• External alarm
• Military communications
• Set top box
• emergency room
• Linux and server computing
• Important electronics for automotive protection