TPS3837E18DBVT

TPS3837E18DBVT Overview

This power management consists of 5 mounting terminals on which it can be mounted. Packaging is in the form of a Cut Tape (CT). The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. According to the specification, the package's peak reflow temperature is specified to be 260. When 1.8V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. The total number of pins on this power management is 5. The pins of the power management system count 5. It is recommended that Vsup should not be less than 1.6V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 250nA. To find similar IC managements from the manufacturer, you can always search by TPS3837E18. A maximum supply temperature of 15μA can be used.

TPS3837E18DBVT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current

TPS3837E18DBVT Applications

There are a lot of Texas Instruments TPS3837E18DBVT Voltage Supervisors applications.

• Magnetic resonance imaging
• Microcontroller system
• Important electronics for automotive safety
• FPGA design
• Military electronics
• Kitchen appliances
• Fire equipment power monitoring system
• Urban rail transit weak current power monitoring
• Insulation fault location system
• Solar power charger